Rate type constitutive equations for fiber reinforced nonlinearly vicoelastic solids using spectral invariants

In this paper we are interested in developing constitutive equations for fiber-reinforced nonlinearly viscoelastic solids. It has been shown that constitutive equations for such bodies can be expressed in terms of a complete minimal set of 18 classical invariants associated with deformation and fiber orientation. In this paper, we give an alternative formulation using a set of spectral invariants. It is shown via the use of spectral invariants that only 11 of the 18 classical invariants are independent. We analyze the spectral invariants for two illustrative deformation gradients: (i) simple tension, and (ii) simple shear.     

Analysis of refractometric fiber optic state-of-charge (SOC) monitoring sensor for lead acid battery

In situ monitoring of the state of charge (SOC) of lead acid battery is important to understand the residual electrical energy. Usage of battery reduces the charge content of the active electrolyte which in turn changes its refractive index. This paper reports refractometric fiber optic sensor developed for on-line monitoring of SOC. The SOC is monitored during discharging phases of the battery using the developed fiber optic sensor probe along with terminal voltage, temperature and depth of discharge using a LABVIEW based data acquisition system. The paper gives the working principle, design and construction details, results and calibration of the fiber optic sensor (FOS) probe. The in situ monitoring capability of the developed FOS is demonstrated in comparison with the contemporary off-line methods of specific gravity and terminal voltage measurements.     

Thermal Degradation of Polysiloxane Coatings on E-Glass Fiber. A FTIR Study

Fourier Transform Infrared Spectroscopy and Thermal Analysis have been used to study the thermal and termooxidative degradation of polysiloxane coatings obtained by treating E-glass fiber with aqueous solutions of 3-chloropropyltriethoxysilane. Initial weight losses were due to polymerization of the coatings. Severe oxidative degradations were observed at temperatures above 180°C. At 550°C the residue of the coating was found to be silica with free silanol groups.     

On the molecular mechanism of the crystal transformation (tetragonal-hexagonal) in polybutene-1

The phase transformation from the tetragonal to the hexagonal crystal modification in highly oriented lamellae of poly-butene-1 has been followed by transmission electron microscopy (TEM). It is found that the reaction-controlling step is the nucleation process. No lattice orientation relationship (besides the [001]-direction, which is parallel in both crystal modifications) exists between non-transformed and transformed crystals. The nucleation is strongly enhanced by thermal or external stresses. Crystal growth, nucleated by external stresses, was observed at temperatures as low as — 150°C. The molecular mechanisms of the transformation are discussed.     

Reagentless Bioluminescent Sensor for NADH

Abstract

A reagentless fiber optic biosensor specific for NADH, associated with flow injection analysis and based on bacterial bioluminescence is described. Only a buffer solution as flowing stream is required for the probe which works without supply of its coreactants (FMN and N-decyl-aldehyde). These are coentrapped in a poly(vinyl)alcohol (PVA) matrix which allows their internal release in the vicinity of the immobilized enzymes. Two PVA matrices differing by the reticulation process have been tested : first, by polymerization with glutaraldehyde and secondly, by a cyclic freezing-thawing process. The self-containment working time was estimated at 1 and 1.5 h of continuous measurements, respectively. NADH was determined using flow injection analysis. The sensor gave excellent reproducibility (RSD ≤ 3%) in the linear dynamic range 5 — 500 pmol with an average cycle-time of 2.5 min.     

Self-swept erbium fiber laser around 1.56 μm

Self-swept erbium fiber laser emitting around 1.56?μm is reported in detail. Both sweep directions were registered: pointing toward longer and shorter wavelengths, redshift and blueshift sweeping, respectively. We describe method of determining the direction of the wavelength drift using the monochromator based optical spectrum analyzer. Possible root for this sweeping regime, i.e., the gain modulation along active fiber, is discussed with the help of a simple model calculating the overall cavity gain that can predict the direction of the laser wavelength sweeping.     

基于MARG的无人机抗干扰系统的研究

由IMU或电子罗盘组成的无人机航姿测量系统易受载体有害加速度或周围局部磁场干扰导致姿态角解算不准确。针对该问题提出将自适应扩展卡尔曼滤波算法应用于该系统。在卡尔曼滤波算法中提出引入分段函数构造自适应测量噪声方差阵。相比于传统噪声方差阵的阈值判断方法,该方法提高了传感器信息的利用率,进一步减小了外界干扰对系统姿态估计的影响,最终提高了姿态角的解算精度。最后针对该方法进行了仿真分析和无磁转台实验验证,仿真和实验结果表明,该方法能有效提高无人机航姿测量系统的抗干扰能力,具有一定的应用价值。     

Bio-based and Biodegradable Electrospun Fibers Composed of Poly(L-lactide) and Polyamide 4

Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.     

光纤光谱仪的多样化组装及应用——介绍一个仪器分析实验

介绍了一个本科生的仪器分析实验——光纤光谱仪的多样化组装及应用。利用光源、光纤和电荷耦合器件检测器等部件,组装出紫外-可见光谱仪、分子荧光光谱仪、近红外光谱仪、拉曼光谱仪和激光诱导荧光光谱仪。通过本实验,不仅能够拓展传统光学实验的内容,而且可以通过自己动手组装仪器,培养学生的专业实践能力和知识应用能力。